Step 1 – Assemble Supplies.
- Fabric - a medium weight cotton, muslin or linen fabric works well. Avoid wool, which retains sweaty heat, and light fabrics, which tend to cling and tangle between the legs.
- Sewing thread or iron-on tape
- Several large safety pins
- Accessories: broach, trimming, gold chains, belt (see Costume Resources for a list of where to buy great trimming)
Step 2 - Cut the Fabric.
The width of the fabric should be equal to your height. Depending on how long you like your toga, the length of the fabric should be 3 to 4 times your height. Find the midpoint of your fabric. Mark a semi-circle with chalk. Cut out the semi-circle shape. For a finished look, hem the fabric (up to I inch) using a sewing machine or iron with hemming tape.
Step 3 - Add Trim.
Cords can be used to bind, tie or support and are available in a variety of colors and sizes. Beaded trim or luxurious glossy satin will transform an ordinary toga into an extraordinary costume.
Trim can be applied anywhere on the body of the garment, or close to the furnished edge. Before adding trim to the hem of the toga, make sure you have a continuous strip. Pin the trim to the toga first, then sew with a sewing machine or use iron-on hemming tape. Beaded trim is too delicate for a sewing machine or hot iron, and must be hand
sewn.
Step 4 - Tie Your Toga.
In order to fasten the toga securely, be sure to wear something (shorts) underneath! Wrap the toga 1 ½ times around waist and pin firmly. Throw the remaining fabric over one shoulder allowing it to drape. Pin firmly to waist. Take excess material and either tuck it into the back of the waistline or tie the fabric together with a colored cord, sash or belt.
| Next > |
|---|
